This adjustable aluminum frame-seating platform takes riding comfort to the next level. Now you can have control over the outboard engine, while a padded boat chair supports your back. After trying this new system, you’ll never go back to a regular plywood bench.
Due to the fact that this system is mounted to the floor and not to the boat tubes, vibration and bumps during a choppy ride are significantly reduced.
|
Holes in the aluminum frames are designed to match 7" economy boat seat pedestals that are sold in many retail stores such as Kmart, Wal-Mart and Outdoor World. A swivel base and boat fishing chair with back support can easily be installed on top of the boat seat pedestal. These items are also available in the retail outlets mentioned above.
|
|
NOTICE! We sell the aluminum seating platform only. The swivel, pedestal and chair must be purchased from a separate retailer such as Kmart, Wal-Mart or Outdoor world. That way you can design your seating to fit your needs!
 |
+
|
|
+
|
|
|
about $12.00
|
|
about $8.00
|
|
about $20-40
|
|
Economy boat seat pedestals retail for around $12, a swivel base costs $8, and fishing chair prices can vary depending on comfort level from $20 to $45. You also will need stainless steel mounting hardware. Bolts with round heads should be inserted in the frame from the bottom up, so that the round head of the bolt touches, but does not scratch the floor.
The adjustable aluminum frame can fit any size boat from SD260 to SD430 and many other brands of boats on the market. It will work with air deck or hard deck boats. Frame will extend from 31" to 44", fitting most boats with interior width between those sizes.
The installation is simple. First, deflate the tubes and simply place the platform inside the boat. Then, push the adjustable components away from each other until the outer sides of the aluminum frame tubes touch the inside of the boat tubes. Finally, tighten the screws and inflate boat tubes to squeeze the seating platform between the boat tubes. For boats with plywood floors, the platform will rest on the stringers.
The installation is simple. First, deflate the tubes and simply place the platform inside the boat. Then, push the adjustable components away from each other until the outer sides of the aluminum frame tubes touch the inside of the boat tubes. Finally, tighten the screws and inflate boat tubes to squeeze the seating platform between the boat tubes. For boats with plywood floors, the platform will rest on the stringers.
Aluminum Adjustable Seating Platform
(SOLD OUT! CHECK BACK SOON!)
ONLINE PRICE: $79.00
SHIPPING: $9 * (by FedEx Ground)
*Canada zone 1 = $39 USD, Alaska, Hawaii, and Canada zone 2- contact us for a rate quote! |
|
Site Map | Inflatable Boats | River Rafts and Kayaks | Accessories
