AlpineBoats.com - Inflatable Boat Covers

Inflatable boat Bimini Covers

Make your inflatable boat riding experience even more comfortable and protect yourself from the sun's ultraviolet rays with the Saturn Bimini Top.

Keeps you cool and protected from the harmful UV rays of the sun and unexpected rain. PVC Coated polyester canopy and folding aluminum tubing. Fits all boats with pined oarlock.

This optional Sun/Rain Canopy is easy to install. The canopy has two support poles on each side which form a V, and anchor to oar locks near the center of the boat. The canopy is held in place by 4 bow lines, two center brackets, and two stern lines. Can also beinstalled on SD430 with some do-it-yourself modifications.

Installs in seconds.
Protects from heat and rain.
Rugged, waterproof reinforced canopy top.
Folding 1" diameter aluminum tubing poles.
Make your boat looks really cool.
Can be used while riding boat.
Comes in 2 or 3 bow versions.
Packing size 59x14x4".

2 Bow Inflatable boat Bimini Top
Light Gray
( In-stock now and ready to ship! )
ONLINE PRICE:: $89.00
SHIPPING: $19.00* (by FedEx Ground)

*Canada zone 1 = $39 USD, Alaska, Hawaii, and Canada zone 2- contact us for a rate quote!

Both support poles have round holes that fit onto pins of oar locks. Use enclosed short plastic tubes to prevent poles from sliding on pins. Stern and bow lines can be attached to the plastic ties for easy removal, or directly to rope holders. Line tension has to be properly adjusted in order to keep canopy in place.

Oars can be placed on top of oarlocks and fastened with rubber cord. If you need to use oars, just fold canopy toward the bow, unscrew pins and remove poles from oarlocks. Move folded canopy a couple of inches toward bow and install oars onto pins of oar locks.

Since SD430 boat does not have pinned oarlocks, canopy poles may be attached directly to splashguard protectors on top of boat tubes. Distance between splashguards is 58" and bimini top should fit just fine. Plastic tie can be run thought the support pole holes and rope holes in splashguard. Properly adjusted lines will hold canopy in place. See below picture of SD430 with canopy installed.